The Lyric HG Microphone Cable

The Lyric HG Microphone Cable

Regular price $118.00 USD
Regular price Sale price $118.00 USD
Sale Sold out
Shipping calculated at checkout.


The Lyric HG is a microphone cable that faithfully passes the character of the microphone to a preamp without change and allows what’s being recorded to be captured as accurately as possible.

We use our proprietary single solid core IGL (Increased Grain Linearity) copper conductor for positive and inverted runs of the signal path.

The negative effects of strand interaction are eliminated from the signal.

The braided shield provides outstanding noise rejection.

These key differences in design allow what comes out of the cable to match what goes into the cable.


High-purity IGL copper conductors for distortion-free midrange and high frequencies.

Solid-core conductors eliminates the negative effects of strand interaction on the audio signal.

20 awg conductor size keeps skin-effect distortions outside the audio spectrum while offering ample cross-sectional area.

High-density shielding blocks noise.

Carbon-loaded extrusion for protection from triboelectric noise.


The Lyric HG microphone cable comes standard with Neutrik™ XLR connectors. The connectors use a high-copper-content bronze, which has the perfect balance of conductivity and strength, along with a unique chuck system to keep the cable mechanically attached to the cable for life.

The bronze contact points have a nickel plating, which does a good job of protecting against corrosion.

While gold plating has a higher perceived value than nickel plating, gold offers no conductive advantage to nickel in this context and is not worth the additional cost.

The fact that gold plating is done on top of an existing nickel plate to look good only makes the connector sound worse by forcing the signal to transfer through the additional layers and impurities that collect between them.

The connectors are soldered to the Lyric HG using TRT Wonder Solder Signature.


Break in:

Cables sound best after carrying a signal for approximately 40 hours. This is due to the dielectric forming. As the conductor’s insulation material stores and releases an electric signal, its molecular characteristics stabilize with regard to how they store and release the energy applied by the conductor. Expect any cable to sound its best only after passing a signal for 40 hours. Note that approximately 80% of the change occurs during the first 10 hours a signal is presented to the dielectric. Don’t expect too much after that.

**For any other length or plug requirements please contact us for a custom quote**

View full details